cancel
Showing results for 
Search instead for 
Did you mean: 

Reconfiguring Ruckus

theotherone89
New Contributor

I have only used my spectrum wifi until now. But starting to have issues with certain devices (specifically 2 different HP printers) not wanting to connect and intermittent dropouts. I am trying to use the Lennar wifi off the ruckus and it barely works at all. I want to reconfigure the system so I can login and manage with the app. When I am connected to that Lennar wifi, the ruckus unleashed app says that I’m not connected to an unleashed network. Not sure if my APs are working properly because that should be my unleashed network (correct if wrong). Pretty sure the previous tenants didn’t do anything with the ruckus so I’m looking for how to do an initial setup and get everything linked in with the ruckus apps so I can manage the network. Im also looking to possibly update firmware as well. Im hoping I can do that through the app so I dont have to use the flash drive procedure. Can someone point me to the right procedure for this? Having a hard time trying to find what I need in the forum. Thanks.

37 REPLIES 37

Same results as before. Please advise next steps.

At what point do we see that this is a hardware problem with the switch and we need a replacement and a technician to come by to properly install and configure the network? 

Hi @theotherone89 

Greetings!!!

Thank you for your responses on a private chat.

As we tried to troubleshoot on a private chat, based on the troubleshooting done, your ICX-7150-C12P Switch is unable to recover the kernel image. The failure persists. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL), and paste it into the chat to start the unit replacement.

Please follow the steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided below:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.