Lennar Home wifi extender not powering on

[Justin_rey95]

Hello, sorry for the late reply but I was away for some time. 

I’ve attempted the suggested trouble shooting techniques and was able to access my terminal to attempt to power on the extender as demonstrated. Unfortunately my device still won’t power on. I’ve provided a picture of the terminal information.

[Justin_rey95]

 

[Imran_ruckus]

Hi @Justin_rey95 

Greetings!

Thank you for your response and the update.

I have moved your post and created a new one, as the previous one has been closed.

Could you please execute the following commands and provide the outputs?

enable

show version

show flash

show inline power

show inline power detail

show interface brief

Please feel free to reach out if you have any questions or require further clarification.

Thank you again for your patience.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

[Justin_rey95]

Here are the following commands. 

 

  

[Imran_ruckus]

Hi @Justin_rey95 

Thank you for the response and the update.

Please enter the below commands and try once again:

Switch>enable
No password has been assigned yet...
Switch#configure terminal
Switch(config)#interface ethernet 1/1/1 to 1/1/12
Switch(config-mif-1/1/1-1/1/12)#no inline power (please wait till the process gets complete)

Switch(config-mif-1/1/1-1/1/12)#inline power (please wait till the process gets complete and check)

Please check and let me know if it starts working after the above process.

Thank you again for your patience and understanding. 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.