ICX-7150-C12P takes multiple attempts to boot or reset in in switch console

[LuanN]

Hi Imran,

I would like to do an upgrade on my RUCKUS ICX-7150-C12P to avoid any issue later. Can you please help me with that? Thanks!

[Imran_ruckus]

Hi @LuanN 

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that you need assistance in upgrading your RUCKUS ICX-7150-C12P Switch.

Please refer to the below RUCKUS Lennar Knowledge base self-help article for the upgrade process that helps you to upgrade the Switch to the recommended 08095g version.

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-upgrade-RUCKUS-ICX-71...

If you can access the CLI, we suggest you upgrade the Switch using 2nd option from the guide.

PLEASE NOTE: The upgrade path for you would be: Non-UFI version before 08.0.80f>>08.0.80f>>08.0.95g. Just upgrade your Switch to the 08.0.80f version manually using CLI and IGNORE upgrading to 08.0.95g since we have an upgrade tool released recently that will automatically upgrade the Switch to the 08.0.95g version. Simply you need to enter IP Address, Username and password of the Switch in the software.

Refer to the below link to download the Upgrade software for Windows:

https://support.ruckuswireless.com/software/3837-lennar-upgrade-tool-mvp-windows

Refer to the below link to download the Upgrade software user manual:

Upgrade Tool User Guide for Lennar SmartHome users:

https://support.ruckuswireless.com/documents/4754

Please let me know if you need any help during the process.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[Imran_ruckus]

admin test

[Imran_ruckus]

Hi @LuanN 

Greetings!!!

Hope you are doing well.

Could you please provide an update on the status of the issue to proceed further?

Thank you.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community