RUCKUS ICX-7150-C12P Switch running SPR from primary SPS

[pptp]

Hello,

After a power outage of several days, it appears the switch is running SPR but it looks like both my primary and secondary code both say SPS so I am unsure how to fix this:

SSH@ICX7150-C12 Router>enable
No password has been assigned yet...
SSH@ICX7150-C12 Router#show version
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on Jun 6 2024 at 08:46:54 labeled as SPR08095p
(33554432 bytes) from Primary SPS08080d.bin (UFI)
SW: Version 08.0.95pT213
Compressed Primary Boot Code size = 786944, Version:10.1.26T225 (mnz10126)
Compiled on Tue Nov 29 12:43:26 2022

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module
Serial #:FEK3817Q8F6
Software Package: ICX7150_BASE_L3_SOFT_PACKAGE
Current License: 2X1G
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8 MB boot flash memory
2 GB code flash memory
1 GB DRAM
STACKID 1 system uptime is 2 minute(s) 23 second(s)
The system started at 13:05:59 GMT+00 Thu Jun 06 2024

The system : started=warm start reloaded=by "reload"

SSH@ICX7150-C12 Router#show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 33554432, Version:08.0.95pT213 (SPS08080d.bin)
Compressed Sec Code size = 33554432, Version:08.0.95pT213 (SPS08080d.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.26T225 (mnz10126)
Compressed Sec Boot Code size = 786944, Version:10.1.14T225 (mnz10114)
Code Flash Free Space = 1256574976
SSH@ICX7150-C12 Router#