R510 EOL

[raymond_jender]

I know it's EOL,  but can you tell me what update I should install based on the following image:

 Do I update with each version, or just the .145 version?

[Imran_ruckus]

Hi @raymond_jender 

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community. 

We appreciate your patience and understanding as we work to resolve the issues you are experiencing with your RUCKUS setup.

Based on the information provided, it appears that you need assistance in Upgrading your RUCKUS Unleashed firmware.

Please note that even if the Access Point has reached End-of-Life (EoL), support through this Community Forum remains available and we’re always happy to assist you.

The current recommended RUCKUS Unleashed version is 200.15. Since your deployment is currently running an older 200.6 version, you will first need to upgrade to an intermediate release such as 200.7 or 200.8, and then proceed with the upgrade to 200.15.

Please refer to the following RUCKUS Lennar Knowledge Base self-help article for the detailed Access Point upgrade process:
https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/RUCKUS-Unleashed-Access-Poin...

Please let me know how it goes, and feel free to reach out if you need any assistance at any stage during the upgrade process.

Thank you again for your patience and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

[Imran_ruckus]

Hi @raymond_jender 

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

[raymond_jender]

What should my update path be?  Currently I have one AP, running on 200.6.10.308.  There is a 200.6.10.1.312, 200.7.10.2.339 and 200.7.10.102.64  update available, and seven different 200.7.10.202.xxx updates.  Must I install each 200.7.10.202.xxx update one at a time, or can I just update to the latest which is showing 200.7.10.202.145?

[raymond_jender]

What should my update path be?  Currently I have one AP, running on 200.6.10.308.  There is a 200.6.10.1.312, 200.7.10.2.339 and 200.7.10.102.64  update available, and seven 200.7.10.202.xxx updates.  Must I install each 200.7.10.202.xxx update one at a time, or can I just update to the latest which is showing 200.7.10.202.145?