Hello. Power went out the other day. The Ruckus switch seems to be powered on, but the WAPs on each floor will not power on. It appears that other members are experiencing similar issues. My lap top does not have a Ethernet cable port to perform maintenance on the switch. Please advise.
If that does not make any difference, we need to perform a software recovery since it can be that the image flash is corrupted so in basic words the unit is not able to boot up properly and need re-install the image to boot up properly.
3-We need to access (physical) using one of the cables to the ICX-7150C12P mentioned on the below guide:
Fernando, thank you for the help. It appears the first step corrected the issue - applying power while pressing the reset button. Only a couple of devices could not connect to the WiFi after the switch/WAPs rebooted. Not an issue though. Thanks again.