I was on vacation and came home to my unleashed app showing as a router instead of a switch.
I tried rebooting the switch by am seeing the following in the unleashed app.
Based on the screenshot is this the case?
If so how do I fix this? Is this something that is easy to do?
Thank you
1 ACCEPTED SOLUTION
Hi @cmaldoff
Thank you for the response and the update.
Please follow to the below screenshot and enable Telnet:
Once you enable Telnet try to access CLI from the MAC terminal as described below. And perform the commands mentioned below to get this issue fixed.
Example "open terminal":
Telnet: Example
nc 10.0.0.132 23 (Format is : nc <ip address of the switch> 23)
Please Enter the below commands in CLI to fix this issue:
Note: Hit Enter to accept each command
enable
copy flash flash secondary
boot system flash secondary yes
Example:
VIDEO LINK AS REFERENCE: https://www.youtube.com/watch?v=Eem1IBgYaWc
ICX7150-24P Router>enable (hit enter to accept the command)
ICX7150-24P Router#copy flash flash secondary (hit enter to accept the command and wait: until the flash finished)
ICX7150-24P Router#boot system flash secondary yes (hit enter to accept the command: the switch will reboot)
Please let me know if you have any queries in this regard.
Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
I was able to get in and follow the steps.
It is now stuck on after I ran teh boot system flash secondary command
Does this take awhile to complete?
it looks like it reboot and is now showing as a switch.
