ICX7150-C12P after power outage

[pptp]

Hello,

After a power outage of several days, it appears the switch is running SPR but it looks like both my primary and secondary code both say SPS so I am unsure how to fix this:

SSH@ICX7150-C12 Router>enable
No password has been assigned yet...
SSH@ICX7150-C12 Router#show version
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on Jun 6 2024 at 08:46:54 labeled as SPR08095p
(33554432 bytes) from Primary SPS08080d.bin (UFI)
SW: Version 08.0.95pT213
Compressed Primary Boot Code size = 786944, Version:10.1.26T225 (mnz10126)
Compiled on Tue Nov 29 12:43:26 2022

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module
Serial #:FEK3817Q8F6
Software Package: ICX7150_BASE_L3_SOFT_PACKAGE
Current License: 2X1G
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8 MB boot flash memory
2 GB code flash memory
1 GB DRAM
STACKID 1 system uptime is 2 minute(s) 23 second(s)
The system started at 13:05:59 GMT+00 Thu Jun 06 2024

The system : started=warm start reloaded=by "reload"

SSH@ICX7150-C12 Router#show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 33554432, Version:08.0.95pT213 (SPS08080d.bin)
Compressed Sec Code size = 33554432, Version:08.0.95pT213 (SPS08080d.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.26T225 (mnz10126)
Compressed Sec Boot Code size = 786944, Version:10.1.14T225 (mnz10114)
Code Flash Free Space = 1256574976
SSH@ICX7150-C12 Router#

[pinky_ruckus]

Hello @pptp ,

Greetings!

Thank you for sharing the response.

We are glad to know that you were able to upgrade the Switch version and the SPR issue is resolved now.

Please let me know if you have any queries in this regard.

NOTE: Please feel free to mark the post as ACCEPTED SOLUTIONS.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.