cancel
Showing results for 
Search instead for 
Did you mean: 

How do I know if my switch is up to date?

samanthacook176
New Contributor

Hello -

 

This post is related to my previous post: "SWITCH STILL WONT CONNECT AFTER SEVERAL BOOT SEQUENCE & RELOADING ATTEMPTS"

Can you confirm that I have upgraded my switch to the best and latest version possible?

I have followed all of your steps and want to make sure that I have upgraded the switch properly so that I can avoid future issues as the switch registers as a "router" vs a switch every few months and I hate it.

Can you also please confirm how and when I'm supposed to upgrade it? How am I supposed to know when a new version is out and when it's time to upgrade it?

Please use the details below to confirm if I am now running the best possible version needed to help with all of the issues I constantly experience:

 

SSH@ICX7150-C12-Switch#show version

Copyright (c) Ruckus Networks, Inc. All rights reserved.

UNIT 1: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d

(28660224 bytes) from Secondary SPS08090d.bin (UFI)

SW: Version 08.0.90dT211

Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)

Compiled on Thu Apr 21 06:08:52 2022

HW: Stackable ICX7150-C12-POE

==========================================================================

UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module

Serial #:FEK3849RBF6

Software Package: BASE_SOFT_PACKAGE

Current License: 2X1G

P-ASIC 0: type B160, rev 11 Chip BCM56160_B0

==========================================================================

UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module

==========================================================================

UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module

==========================================================================

1000 MHz ARM processor ARMv7 88 MHz bus

8192 KB boot flash memory

2048 MB code flash memory

1024 MB DRAM

STACKID 1 system uptime is 2 day(s) 22 hour(s) 6 minute(s) 53 second(s)

The system started at 21:58:26 GMT+00 Fri Jan 07 2000

The system : started=warm start reloaded=by "reload"

SSH@ICX7150-C12-Switch#flash

Incomplete command.

SSH@ICX7150-C12-Switch#show flash

Stack unit 1:

NAND Type: Micron NAND 2GiB (x 1)

Compressed Pri Code size = 31457280, Version:08.0.95gT211 (SPS08095g.bin)

Compressed Sec Code size = 31457280, Version:08.0.95gT211 (SPS08095g.bin)

Compressed Pri Boot Code size = 786944, Version:10.1.24T225 (mnz10124)

Compressed Sec Boot Code size = 786944, Version:10.1.24T225 (mnz10124)

Code Flash Free Space = 1107275776

SSH@ICX7150-C12-Switch#

0 REPLIES 0