Connection from modem to ICX -7150-C12P? What port?

[armandotop1]

Where do i connect provider modem cable to ICX -7150-C12P? What port?

[Imran_ruckus]

Hi @armandotop1 

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS setup is not working after changing the ISP (Internet Service Provider)

Please note, if your ISP MODEM is directly connected to the ICX-7150-C12P Switch, it doesn’t work only with Modem. The connection must be from a Router or Modem-Router combo device. Could you please check and confirm this once?

Please refer to the short guide link below about how to connect the devices as a reference:

Most common Setups for Lennar homes users:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

Please check and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[armandotop1]

Sorry for the delay. This is my modem description:

GigaSpire BLAST u6.1

Deliver amazing Wi-Fi coverage, with support for hard-wired connectivity

The GigaSpire BLAST u6.1 is a new generation, ‘Wi-Fi CERTIFIED 6™’ EDGE System that integrates the latest and greatest ‘Wi-Fi 6’ technology (802.11ax). 

Product attributes 

• 6x6 Wi-Fi 6 antenna array, with 4x4 @ 5 GHz and 2x2 @ 2.4 GHz 
• 4 x GigE LAN ports
• 1 x GigE WAN port 
• 2 x POTS ports 
• 1 x USB 3.0 (Type A) 
• Enhanced PuF security 
• Managed by Calix Support Cloud 

GigaSpire BLAST u6.1

Deliver amazing Wi-Fi coverage, with support for hard-wired connectivity

The GigaSpire BLAST u6.1 is a new generation, ‘Wi-Fi CERTIFIED 6™’ EDGE System that integrates the latest and greatest ‘Wi-Fi 6’ technology (802.11ax). 

Product attributes 

• 6x6 Wi-Fi 6 antenna array, with 4x4 @ 5 GHz and 2x2 @ 2.4 GHz 
• 4 x GigE LAN ports
• 1 x GigE WAN port 
• 2 x POTS ports 
• 1 x USB 3.0 (Type A) 
• Enhanced PuF security 
• Managed by Calix Support Cloud 

GigaSpire BLAST u6.1

Deliver amazing Wi-Fi coverage, with support for hard-wired connectivity

The GigaSpire BLAST u6.1 is a new generation, ‘Wi-Fi CERTIFIED 6™’ EDGE System that integrates the latest and greatest ‘Wi-Fi 6’ technology (802.11ax). 

Product attributes 

• 6x6 Wi-Fi 6 antenna array, with 4x4 @ 5 GHz and 2x2 @ 2.4 GHz 
• 4 x GigE LAN ports
• 1 x GigE WAN port 
• 2 x POTS ports 
• 1 x USB 3.0 (Type A) 
• Enhanced PuF security 
• Managed by Calix Support Cloud 

Wanting to know if i can connect to my Ruckus ICX 7150 C12P without a router and if so. Which port do i plug into?

R S

MSgt Armando Ortiz USMC ret.

[Imran_ruckus]

Hi @armandotop1 

Greetings!!!

Thank you for the response and the detailed information you shared.

Apologies, as mentioned in my previous post, we cannot use the RUCKUS ICX-7150-C12P Switch without a ISP Router/Modem-Router Combo device. Since ISP Router plays an role of assigning the IP Addresses to the connected devices.

Please let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.