cancel
Showing results for 
Search instead for 
Did you mean: 

Can ICX 7150 be set to switch mode via web interface

MarkKelley
New Contributor III

I have a Lennar home that came with an ICX-7150-12P and two R510s.  Due to a power loss, the iCX has restared in router mode.  I have access to it via the web interface so is it possible to reset it to switch mode via the web or do I need to do it via the console?  I don't currently have access to the console because I need a USB C cable.  I've ordered one but I'd like to fix it now if possible.

19 REPLIES 19

MarkKelley
New Contributor III

Good deal!  I now have switch code in both primary and secondary.  I'm think I'm good to go now.  Thanks @BenBeck !

MarkKelley
New Contributor III

@BenBeck One more question:  When I look in the Unleashed app, the 7150 shows up like this:

ruckus.jpeg

Why is is it stuck "Connecting"?  Everything seems to be working OK.

Hey @MarkKelley 

I am not sure on that. I am an ICX engineer. It may be worth posting in the unleashed section and someone from that group should see it and be able to advise.

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

MarkKelley
New Contributor III

Ok thanks!

MarkKelley
New Contributor III

Ah, I'm logging into the AP not the switch.