RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Hi @nicoledias
Greetings!!!
Thank you for the response and the information you shared.
May I know if you tried to replace the Switch power cord and check once? In case the Switch power cord is damaged.
If yes, could you please plug your ICX-7150-C12P Switch into a working power outlet and send us PICTURES and VIDEO of it showing the light status, and cord connected to the Switch and power outlet? Please refer to the below pictures as an example.
Please use the below link to upload a VIDEO:
https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing
Please let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
Hi @nicoledias
Greetings!!!
Thank you for sharing the requested PICTURES.
As mentioned in my previous post, could you please upload a VIDEO on the drive link showing the working Power Outlet connected to the Cord and the Switch? (Please refer to the below screenshot)
Please let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
