AT&T Fiber Gig internet with 2 r510 APs......

[WKyPT]

I have a two story home with APs on both floors hardwired through a Lennar home.  When speed testing to gateway I am getting 993 Mbps.  When testing from AP to device I am getting around the neighborhood of 32.33Mbps to 218Mbps.   AP to AP is testing at 195.31 Mbps.  What is a realistic expectation of what I should be pulling from AP to device?  I see there is a newer firmware version, but I am running 12.145.2 and these numbers were from when the firmware was current.  

[WKyPT]

Sorry. I have not been at home this week. Should have some time to explore this further on Monday. Thank you for checking in!

[Imran_ruckus]

Hi @WKyPT 

Greetings!

Thank you for the update and your response.

Please keep us informed on your progress, and don’t hesitate to reach out if you need any assistance along the way.

Thank you once again for your patience.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

[Imran_ruckus]

Hi @WKyPT 

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

[WKyPT]

Tried working on this yesterday, but I almost feel this is over my head.  Lots of abbreviations that I have to take a step back to try and understand before progressing, then there is the fear of messing things up more because I don’t understand what I am doing. I’ll keep trying to work on it, but it is outside my comfort zone. 

[Imran_ruckus]

Hi @WKyPT 

Greetings!

Please use the private chat option to respond so we can proceed further. For your reference, I have included a screenshot below.

Thank you once again for your patience and understanding.

Best regards,

Imran Sanadi 

RUCKUS Lennar Home Community