RUCKUS Support for Lennar Knowledge Base

Fixing RUCKUS Switch with an Amber/Orange light on "SYST" & Green light on "PWR" & NO lights on APs

Issue Description: If your RUCKUS ICX-7150-C12P Switch stopped working after a power outage or power spike, it may be stuck in what’s called boot mode. In this state, the switch fails to start up normally and will not supply power (PoE - Power over E...

Fixing “host 192.168.0.x is not alive” (not alive) error during the Switch Software Recovery Process

Issue Description: If your RUCKUS ICX-7150-C12P Switch experiences a power outage or sudden power spike, it may fail to start correctly and enter what is called boot mode. In this state: The SYST (System) light stays Amber/OrangeThe PWR (Power) light...

Establishing Console CLI Access on the RUCKUS ICX-7150-C12P Switch

Overview : When the RUCKUS ICX-7150-C12P Switch's IP address cannot be retrieved to access the Command Line Interface (CLI), the alternative method is to connect via a Console cable between the Switch and a laptop/Computer.The following RUCKUS Le...