Adding Wi-Fi controllers with smart redundancy setting to RDD

[kenneth_lee_kh2]

If I have 2 controllers setting with smart redundancy and management IP set. How do I add the two controllers in RDD?

Adding two individual controllers? or only add the management IP?

If adding two individual controllers, it seems that RDD can only login to any one of the controllers.

If adding the management IP only, I can only see 1 controller in RDD.

Thanks!

Kenneth

[kenneth_lee_kh2]

Hi Omer,

Yes, what you mentioned is exactly I am facing. Actually, if adding both ZDs, I have also found that the information collect may not correct.

e.g.
- All APs are connecting to controller 1, however, RDD shows the APs are all connecting to controller 2.
- Always have alert that RDD cannot connect to controller 1 sometimes and then controller 2 sometimes.

Let me try to use management IP again~

Thanks!

Kenneth

[syamantakomer]

Hi Kennet,

Our RDD team is working actively to improve/enhance this but for now please use management IP of the ZD.

Let us know how it goes.

Regards,
Syamantak Omer