cancel
Showing results for 
Search instead for 
Did you mean: 

Mr

miguel_navarro
New Contributor

Good morning, I have a Ruckus 1200 and it is out of service, the two ethernet ports do not respond, they stay with the LEDs on permanently and do not show activity. You cannot enter the device through any of the ports (02 ethernber and 01 console) .

Additional how can I recover the license code of my 02 Ruckus 1200

6 REPLIES 6

syamantakomer
Community Admin
Community Admin

Hi Miguel,

If console is also not showing any logs or login, then there is nothing left.

You can try doing a factory reset once (push and hold FD button for 12 second). If that also doesn't fix the issue, please raise the RMA for the replacement.

For the licenses, support will move the licenses to the replacement device.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn

miguel_navarro
New Contributor

Thank you very much for answering my ask, can I use the license of the ruckus 1200 fallen in my secondary ruckus 1200???

Hi Miguel,

No, you cannot use the AP license of one ZD with another.

If you need time for replacement, you can request for temporary license from our support site (link provided below) and same will be valid for 30 days with ZD's full AP capacity. In the meantime, you can get your faulty device replaced.

https://support.ruckuswireless.com/temp_license_requests/new


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn

Thank you a thousand Syamantak Omer,Please could you tell me where I can buy a Ruckus ZoneDirector 1200 and what is the approximate cost ... Ah it's for Lima Peru