how to configure the zoned directory 1200 and how to add the ap's to that zone directory

[rameshbabu_putt]

we have the zone directory 1200 how can i add the ap s in the zone directory please share any documentation 

[neil_neil_67001]

Hi - We have a range of videos on the ZoneDirector on our YouTube channel here:
https://www.youtube.com/watch?v=V054crX14-w&list=PLySwoo7u9-KK22IfeyIvslIFA8iyhgcgq

The specific module for joining access points is shown below.

It's a good idea to view some of the previous modules first for guidance on configuring the system before joining the access points.

Good luck!

Neil Mac

[monnat_systems]

if AP and controller are in same L2 subnet then if AP receive IP from same L2 subnet then AP will discover the controller auto.

If AP and controller are in different network then you can force the AP to discover the controller by running CLI commands using SSH/Putty

set director ip

example : set director ip 192.168.1.10

[kingkong123]

A handful number of users are getting some configuration errors with Outlook based systems. To stop their issues can take help from Mac Outlook Search Not Working to overcome their issues effortlessly.