cancel
Showing results for 
Search instead for 
Did you mean: 

Setting up SAS-CBSD Testing with Ruckus Q710 for End User Device

steven_tran_gty
New Contributor
Hello, I am in need of assistance setting up a SAS-CBRS-End User Device system for End User Device testing. 

I like like to know if there are any detailed guidelines in the test setup (regarding the SAS test harness provided by Winnforum, the Ruckus authorized CBSD, and with the EUD)

I am attempting to validate the two following conditions (per the WinnForum  spec for SAS- CBRS-EUD):

1. Confirm that the device will transmit only after it receives authorization from an associated CBSD.

2. Confirm that the device discontinues operation, changes frequency, and changes its operational power level within 10 s of receiving instructions from its associated CBSD.

Thank you in advance for reading and I appreciate any help I can get.

Best Regards,

Steven











0 REPLIES 0