08-26-2021 01:00 PM
hi!!
I have an icx7150 managed with cloud service and has the following problem
in order to boot the device, i need to connect with the console cable.. and hit enter... (the system is waiting for it, and wont boot unless i connect)
if I run the show config I get this
INFO: empty config data in the primary area, try to read from backup
If i try to write the current configuration.. i get the following
Telnet@ICX24P(UNO)(config)#write memory
There is no startup config file, unable to save legacy config
flash_fcreat: Failed to create file startup-config.txt
Error - failed to create startup-config.
Copy Failed.
If i do a "show files"
i get this
telnet@ICX24P(UNO)(config)#show files
Type Size Name
----------------------
F 33554432 primary
F 32946920 secondary
xCAT: flash_get_next_file_in_dir: Failed to get stat of /fast_iron//primary.sig
F 812 startup-config.backup
xCAT: flash_get_next_file_in_dir: Failed to get stat of /fast_iron//startup-config.txt
F 162204 poe-fw
xCAT: flash_get_next_file_in_dir: Failed to get stat of /fast_iron//icx_dhcp_snoop.db
F 1576 $$ssh8rsahost.key
F 256 secondary.sig
66666200 bytes 6 File(s) in FI root
1039908864 bytes free in FI root
****************************
******************************************
is there something wrong with the flash memory?
08-26-2021 01:58 PM
Have you reloaded since you have seen this issue?
I have not seen this specific item, but I would recommend opening a case to get it looked at. Please see my signature.
08-26-2021 02:21 PM
@ben_beck No i havent reloaded..
im reading the documentation from "reload", the icx is a single unit..