CommScope RUCKUS Community Forums

amjad_hamayel · ‎12-09-2020

hello All,

can we do a stacking if we connect copper transceiver to uplink port on ICX7250-48P-2X10G ??

DarrelRhodes · ‎12-09-2020

Hi Amjad,

The Ruckus certified 10G-BASE-TX RJ-45 optic (10G-SFPP-TX-A) cannot be used for stacking.

Passive and active copper DAC cables are available and can be used for stacking.

For further details please refer to the Ruckus Optics family data sheet for further details: https://www.commscope.com/product-type/enterprise-networking/optical-transceivers/

Also be aware that 10Gb RJ45 optics have high power consumption and generate high temperatures, so it may not be possible to run 2x of these modules side-by-side.

Best regards,
Darrel.

View solution in original post

DarrelRhodes · ‎12-09-2020

My pleasure! 🙂

It's not possible to stack at 1Gb on any ICX 7000 series switch, regardless of the connection type (multimode/singlemode/copper).

I hope that helps,

Darrel.

amjad_hamayel · ‎12-09-2020

thank you very much

va1046 · ‎11-22-2022

Hi Amjad,

You an use the below link for

Optics supported for both stacking links and Ethernet data links.

https://www.commscope.com/globalassets/digizuite/61722-ds-ethernet-optics-family.pdf

Regards,

Vivek

CommScope RUCKUS Community Forums

stacking over copper ICX 7250