cancel
Showing results for 
Search instead for 
Did you mean: 

how to remove manager port-list ??

wanji
New Contributor II

photo_2023-06-08_16-47-09.jpghello..i already upgrade firmware ruckus..but manager port list keep appeared although i've already remove and save it ...when i reboot switch the command appeared again..pls help

6 REPLIES 6

wanji
New Contributor II

pls help anyone

BenBeck
Moderator
Moderator

Did you already try this:

conf t

no manager port-list 987

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

wanji
New Contributor II

yup....already try.....and gone after type no manager port-list 987...do wr mem and reboot switch...after reboot...it appeared again...

va10461
RUCKUS Team Member


Hi Wanji,

I just tried the below in lab on ICX 7550 switch running GZS08095h.bin and it worked for me.


ICX7550-24F Switch#sh run | i manager
manager registrar
manager port-list 987


ICX7550-24F Switch(config)#no manager port-list 987
SZ is not in disabled state so unable to configure

ICX7550-24F Switch(config)#sz disable
SZ Disable Initiated...
SZ Connection would be disconnected now if connected...

ICX7550-24F Switch(config)#no manager port-list 987
ICX7550-24F Switch(config)#end
ICX7550-24F Switch#sh run | i manager
manager disable
manager registrar

If it does not work in your device. please open a support case so we can formally investigate.

You can use below link to log a ticket:
https://support.ruckuswireless.com/contact-us

Thanks,
Vivek


Vivek Alaparthi
Staff TSE | CCNA | CCNP | RCNI

RUCKUS Networks, CommScope!

Follow me on LinkedIn