error invalid input when trying to create ve interface

[dragos_dimitriu]

I'm getting the error invalid input when trying to create ve interface
Firmware version :  SPR08061c

I have created a VLAN , added an untagged port to created VLAN .
When trying to create a routing interface 'router-interface ve 100' I'm getting the following error :

"error - IP routing, vrf, ip policy, route-only, rpf-mode or ip-mac was configured on ports  1/1/10"

[BenBeck]

Something under interface 1/1/10 is probably stopping the configuration. Can you post "show run int e 1/1/10"?

[dragos_dimitriu]

Solved. It was an ip addr set on interface 1/1/10
All works now

Thanks

[agent_halal]

I have a ip addr set too, how did you clear it? The port it says I have an ip addr is my uplink port to a switch but eventually to my modem, would clearing the ip effect anything? anything helps!