Very simple question!
Replacing an icx7250-48p-poe with the exact same model, current one has a couple bad ports.
I was just going to copy the startup-config.txt to the new device. (USB or TFTP)
But.. they are at different flash versions.
startup-config.txt (Current switch)
!
ver 08.0.61cT213
!
stack unit 1
module 1 icx7250-48p-poe-port-management-module
module 2 icx7250-sfp-plus-8port-80g-module
Do I remove the ver number, changed it to the current flash version on the new switch, or will the switch just automatically change it?
Cheers
