cancel
Showing results for 
Search instead for 
Did you mean: 

Why can't I enable multicast on ICX 7250

sven_schoneveld
New Contributor II
We are using the ICX 7250 switch in combination with data diodes and for that reason we need multicast to be enabled. But when I enable the multicast via the web interface of the ICX 7250, it disables itself after applying. Is there a trick or firmware update needed ?
7 REPLIES 7

jijo_panangat
RUCKUS Team Member
You can get the firmware from below link.

https://support.ruckuswireless.com/software?filter=105#firmwares


Thanks
Jijo 

sven_schoneveld
New Contributor II
Hi Jijo,

We installed another firmware (08.0.30h) and by doing this we have the multicast working.(The picture I did sent was from the other switch, my bad, the one not working had 08.0.30r). I have no idea what the difference between the 'h' and 'r' version is.

The reason for installing the 'h' version is that we have other switches with this firmware version that worked with multicast.
I do not know if you can mix different firmware versions within a network.

But now we are encountering the next issue. 
It deals with VLANs in combination with multicast. (we don't have this working yet, but have confidence that this one will be solved too).
My colleague is already in contact with Ruckus to solve this one.

Thank you for your help.

Best regards,
Sven.

jijo_panangat
RUCKUS Team Member
Hi Sven,

Glad to hear that. 8030 code branch is restricted in terms of bug fix and recommended software target path for ICX 7K series is 8070, 8070g is the latest hence the recommendation.


Thanks
Jijo