Hello I am trying to setup an ICX 7150 to allow me to have multiple vlans share the same dhcp server on one vlan and the internet connection on the default vlan
However my very simple config seems unable to route from vlan 2 across to the default vlan
I have port 1/2/1 configured with ip address 192.168.50.15/24
My router is ip 192.168.50 254
I have the ip address range 10.172.2.1/24 attached to virtual interface VE 2
DCHP on 10.172.2.0 and that works if i connect to a untagged switchport
But I am unable to access the internet from any device with a 10.172.2.x address, default gateway is set to 10.172.2.1
Any advice greatly received and config shown below
ICX7150-C12 Router#sho run Current configuration: ! ver 08.0.95dT213 ! stack unit 1 module 1 icx7150-c12-poe-port-management-module module 2 icx7150-2-copper-port-2g-module module 3 icx7150-2-sfp-plus-port-20g-module stack-port 1/3/1 stack-port 1/3/2 ! ! global-stp ! ! ! vlan 1 name DEFAULT-VLAN by port spanning-tree ! vlan 2 name server by port untagged ethe 1/1/1 to 1/1/4 router-interface ve 2 !
aaa authentication web-server default local aaa authentication login default local boot sys fl sec console timeout 30 enable aaa console ip dhcp-client disable ip dhcp-server enable ! ip dhcp-server pool server lease 0 0 30 network 10.172.2.0 255.255.255.0 option 3 ip 10.172.2.1 option 5 ip 220.127.116.11 deploy ! ip default-network 192.168.50.0/24 ip dns server-address 192.168.50.254 ip route 0.0.0.0/0 192.168.50.254 ip route 10.172.2.0/24 192.168.50.254 ip router-id 192.168.50.15 ! telnet timeout 10 no telnet server username super password ..... username mgladmin password ..... ! ! password-change any ! ! ! ! manager registrar 18.104.22.168 22.214.171.124 manager active-list 126.96.36.199 188.8.131.52 ! manager port-list 987 ! ! router ospf area 0.0.0.0 ! ! ! ! ! ! ! ! interface ethernet 1/2/1 ip address 192.168.50.15 255.255.255.0 no ip dhcp-client enable ! interface ve 2 port-name Server ip address 10.172.2.1 255.255.255.0 ! ! ip ssh timeout 30 ip ssh idle-time 10 ! end
Of course it does its just my frustration I apologise, I'm going to swap to a better router firewall with vlan tagging and routing capabilities and see if that helps me get it sorted. I'll be back when I'm ready.