Uploading Image for Ruckus 7150

[thanh_tien_ton_]

I tried to upload image for ICX7150-C12-POE and it was succesful
But when i show version, I saw information as below

BYT-Ruckus-Spare#show version 
  Copyright (c) 1996-2017 Brocade Communications Systems, Inc. All rights reserved.
    UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a
      (24723488 bytes) from Primary SPR08090c.bin
        SW: Version 08.0.61aT211 
      Compressed Boot-Monitor Image size = 786944, Version:10.1.15T225 (mnz10115)
       Compiled on Thu Jan 31 07:08:55 2019


 
Please have a look at the line
"UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a
      (24723488 bytes) from Primary SPR08090c.bin"
Something wrong here
Could you give me advice this case please??

Thank you very much

[simon_pollard]

Hi

What is the output for show flash ?

Note that when upgrading from 8.0.61 to .90 it is a two stage process, you should first do a standard upgrade using the manifest file and then a second upgrade using the .90 UFI image. The upgrade guide has more details https://docs.arris.com/bundle/fastiron-08090-upgradeguide/page/GUID-5DD7EE86-6988-4CA7-81D2-22EA77BD... 

[jijo_panangat]

Hi,

The image you copy/upload goes to the flash. ICX has primary and secondary partitions. The show version can only tell you the partition from which the system booted up.


Thanks
Jijo 

[thanh_tien_ton_]

I uploaded SPR08090c before then i uploaded SPS08061a
It should be shown "from Primary SPS08061a".
What should i do to make it correct now ?

[simon_pollard]

What is the output for show flash ?