Subject: Inquiry on NAT capability for ICX7850-48FS

[golanoma]

Hi Team,

We have an ICX7850-48FS  in production with the following details (output from show version):

• Model: ICX7850-48FS L3-BASE 48-port Management Module
• Software package: ICX7850_L3_SOFT_PACKAGE
• Version: 10.1.24T235 (primary image TNR08095g.bin)
• P-ASIC: B873, rev 01, BCM56873_A0

Could you please confirm the following:

1. Does this platform/OS version support NAT (source NAT, destination NAT or PAT) on routed interfaces/VE interfaces?
2. If NAT is supported, is it included in the current L3 license (l3-prem) or does it require an additional license/feature set?
3. If it is not supported on the ICX7850, is there a recommended Ruckus/Brocade platform or software release that provides NAT for similar campus/DC deployments?
4. If available, please share the relevant configuration guide/CLI reference for enabling NAT on this model.

We want to confirm this before we proceed with using the ICX7850 as the edge device for a VLAN that requires internet access.

Thank you, and looking forward to your guidance.

[Mayank]

Hi Golanoma,

Apologies, but NAT functionality is not supported on ICX switches.

Thanks and regards,
Mayank