Struggling with one DHCP server, and multiple VLANs on ICX 7150 Switch image

[paul_edson]

I have one DHCP server in default VLAN.  I have multiple VLAN (voice) and I want the ports on the VLAN to grab dhcp addresses from additional scopes.  I know that I need to use IP Helper, but all instructions refer to an IP address assigned to your VLAN.  I don't see where to do that...only IP address assigned is the siwtches IP.

[vincent_felisaz]

Hi Paul,
As you are using a Switch Image, only one IP address can be configured on the switch. Generally when using DHCP Services, we load the Routing Image which allows you to configure IP/VE per VLAN and an associated DHCP Pool per VLAN.
Cheers
Vince

[paul_edson]

I understand, but I'm not using the Ruckus DHCP services.  I'm using my windows server DHCP server on the default VLAN, and just want to hand out a scope\different subnet to another VLAN.

[andrew_giancol1]

Paul, are you using a standard switch image, and not Router FW? 

[paul_edson]

Yeah ..Standard switch image (08070d).  I have a flat network now, and daisey chaining an new switch--that will have VOIP on it.  THe DHCP server is on the defautl vlan, on sw1.