New firmware, old bootrom

[sinisa_babic]

Hello,

I did an upgrade ICX7150 to SPS08095e to a few switches but the old bootrom remained on some of them.

telnet@ICX7150#show flash
Stack unit 1:
  NAND Type: Micron NAND 2GiB (x 1)
  Compressed Pri Code size = 31457280, Version:08.0.95eT211 (SPS08095e.bin)
  Compressed Sec Code size = 31457280, Version:08.0.95eT211 (SPS08095e.bin)
  Compressed Pri Boot Code size = 786944, Version:10.1.14T225 (mnz10114)
  Compressed Sec Boot Code size = 786944, Version:10.1.21T225 (mnz10121)
 

Any idea how to solve this?

[mohammad_atmazi]

it's a UFI image no Bootrom is needed

[sinisa_babic]

Thank you for response.

[BenBeck · Accepted solution]

Hey There, 

Are you seeing a bootrom mismatch? 'show version' and 'show boot-monitor' should tell you. The boot code is included in the UFI image. If you are seeing any kind of mismatch, just go ahead and re-copy the UFI image to the appropriate partition (pri/sec) and it should get updated. 

[sinisa_babic]

@ben_beck

I did that and now is ok, there is no mismatch anymore. Thanks.