My primary and secondary flash was erased during an attempt to update the image. My CLI is showing: ICX64XX-boot>>.

[tim_yancey]

My primary and secondary flash was erased during an attempt to update the image. My CLI is showing: ICX64XX-boot>>. I can ping to and from my PC which I am using as ymy TFTP server. I loaded the latest firmware files on to my PC. I have them sitting in C:\image I set the env image_name to image/ICX64S08030r.bin. this is the image i am trying to load. I just get %Ts and then the session errors out. what am I missing?

[khodayar_dousta]

Thanks a lot, I will try this method and update you here.

[khodayar_dousta]

Maybe I don't know how to search in the content, would you please give the URL to the page with FabOS for Brocade 6505b for example?
Thanks again 🙂

[JayyRayy]

5 Years later and now i have the Same Problem, i have done everything like above but i cant even ping the tftp Server. Ethernet cable is connected to the switch but it does not recive any connection.

ICX64XX-boot>> ping 192.168.178.66
egiga0 no link
Using egiga0 device
ping failed; host 192.168.178.66 is not alive
is there any option i am missing ?