cancel
Showing results for 
Search instead for 
Did you mean: 

Modify Traffic Policy

eu_scada
New Contributor II
Hi all,

This may be a silly question, but I can't seem to find the answer for it.

How does one modify a traffic policy?

I understand I would use the no command to remove a setting.

I want to adjust the rate limiting and enable counting, but it keeps stating can't modify while in use.

I removed the traffic policy from all the ACLs, although it still bawks at me.

Do I have to reload the switch after removing the traffic policy from the ACLs?

Any input helps and thanks
8 REPLIES 8

jijo_panangat
RUCKUS Team Member
Hello,

As per the show cmd it says 22 bindings but dont see any in the config shared. Do you have the prior/initial config (with 22 bindings) applied ?
You may try a reload now and if that doesn't help open a TAC case for additional debugging.


Thanks
Jijo 

eu_scada
New Contributor II
Thanks for the reply, 

We will give reload a try and see what happens.

Thanks

eu_scada
New Contributor II
A reload “released” the 22 bindings and I was able to remove the TP. Thanks much

jijo_panangat
RUCKUS Team Member
Glad to hear, Thanks