Recently moved over from a Juniper EX4300 series switch and the only feature I'm missing is the ability to keep PoE ports powered up during reboots. I have a number of PoE devices that I'd like to keep powered during reboots, AP's, NTP clocks, IoT devices and Raspberry Pi's etc. Not that I expect to reboot often once the initial config is done but it was handy on the Juniper from time to time.
This is not currently an option. We enable POE by default on 8070+, but POE will flap upon reboot. You could put in an RFE (request for enhancement) with your account team and it could be considered for future releases/models.
Ben Beck, RCNA, RCNI, Principal Technical Support Engineer support.ruckuswireless.com/contact-us