ICX8200 configuration

[stobbertt]

Hi,

I am having some problems configuring an icx8200 switch. I am following the Ruckus Fastiron Web Manamgement Interface UserGuid 10.0.10. The management port is assigned with an IP address, users are created and authentication is set up.
According to the show web command, the HTTP and HTTPS servers are enabled. However, no IP is displayed under Web Session Management.
The laptop is connected directly to the management port via LAN cable. I can ping the ip, but cannot reach it via the browser

Thanks for help

Patrick

[Mayank · Accepted solution]

Hi stobbertt,

I would recommend you upgrade this switch to 10010c_cd2  and then test it.

Thanks

[BenBeck]

Hey @stobbertt 

Can you ping the switch? Could you give the output of "show run | inc web"?

Thanks in advance. 

[stobbertt]

Hey Ben,

thanks for your answer. Yes i can ping the switch over the ip address from the management port.

when i use the command show run, witch details do you need?

thanks

[stobbertt]

sorry my mistake....

aaa authentication web-server default local

web-management http

web-management session-time 300

web-management tcp-port 80

management-access mac XX:XX:XX:XX deny web

"mac address has been made unrecognizable"

[BenBeck]

Are you trying to block a mac with 'management-access mac XX:XX:XX:XX deny web'? If not, try removing that command. The rest looks okay to me and you should have access on port 80.