ICX Management vlan and DHCP Issue

[lionafrica]

Hello team, 

i no longer received dhcp IP on my management vlan 10 here is my core switch vlan and dhcp configuration below  the switch firmware dosent support VE interface:

vlan 10 name OurMgmt by port
tagged ethe 1/1/1 to 1/1/24
spanning-tree 802-1w
spanning-tree 802-1w priority 4096
management-vlan

ip address 10.255.0.1 255.255.0.0
ip dhcp-server enable
!
ip dhcp-server pool mgmt
excluded-address 10.255.0.1 10.255.4.254
lease 1 0 0
network 10.255.0.0 255.255.0.0
option 3 ip 10.255.0.1
option 43 ip 10.255.0.7
deploy
!

interface ethernet 1/1/1
spanning-tree root-protect

and below this is my access switch vlan and uplink config: 

vlan 10 name OurMgmt by port
tagged ethe 1/1/3 to 1/1/19 ethe 1/1/25 to 1/1/47 ethe 1/3/1 to 1/3/4
untagged ethe 1/1/20 to 1/1/24 ethe 1/1/48
spanning-tree 802-1w 

management-vlan

interface ethernet 1/3/1
dhcp snooping trust

ip dhcp snooping vlan 10
ip address 10.255.0.13 255.255.0.0
ip default-gateway 10.255.0.1

[MariaC862]

Hello!

Thank you for posting. The interface ve command is not available because the switch appears to be running a switching image; therefore, this behavior is expected. If you need to configure an interface VE, you will need to run a routing image instead. Additionally, it seems the ICX is using a static IP. Could you please share the following information to help confirm?

#show version

#show run | inc dhcp

Thanks!