ICX MAC-Auth configured for Access Point.

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Hi,

We have a strange behaviour with MAC-Auth configure on an ICX Switch.

Some interfaces are configured to authenticate Access Point via MAC-Auth (multiple-hosts is configured to allow wireless client's traffic after AP authentication).

Sometimes for any reason the Access Point port is flapping and the switch authenticate a random MAC address from one of the Wireless Clients instead of the one of the AP. (SSIDs are in bridge mode so we can see the different wireless client mac-address on the switch interface).

This behaviour seems not be normal, is there a way to avoid id ?

Thanks in advance,

0 REPLIES 0