02-22-2024 05:48 PM
Hello,
For an ICX 7750-48F switch, and I would like to connect a copper / RJ-45 device that can only operate at 100 Mbps. With a 1G M-TX SFP in place, issuing the "speed-duplex 100-full" command results in a response of "This speed setting is not applicable to port...". Is there any way to connect a 100 Mbps device to this switch?
Thanks.
02-24-2024 11:14 AM - edited 02-24-2024 11:16 AM
The ICX 7750-48F switch from Ruckus Networks does not support copper RJ45 10/100 connections natively. This switch model primarily offers 10 Gigabit and 40 Gigabit Ethernet connectivity options, used trimble dini digital level typically through SFP+ or QSFP+ ports for high-speed fiber connections.