Showing results for 
Search instead for 
Did you mean: 

ICX 7450 copy config by SNMP

New Contributor

Hello, i have ICX 7450-48 with firmware SPR08030u.bin and ICX 7450-24 with firmware SPR08095j.bin. In oldest firmware i can copy config over TFTP by this command:

snmpset -v 2c -c <community> i 1 s switch-config.cfg x C0A80002 i 20

With newer firmware, the command returns the usual responses, but the file is not actually sent to the TFTP server. If I enter the "copy startup-config tftp" server command directly in the switch, the file is sent correctly. Is there any difference between these firmwares regarding this?


RUCKUS Team Member

Hi PedroS63 ,

Thank you for posting you query !!!

I understand that in SPR08095J.BIN you are not able to copy config over TFTP, but in SPR08030u you are able to .

I have a question for you here :

Since the MIB vary from one firmware to another are using the correct MIB for firmware SPR8095J.

You can refer the below links  08095j mib  guide for your ref :

Moving Forward If this issue is not resolved , Please log a ticket with the below link so that we will help you further

I hope this information helps you

Please feel free to leave us a message if any concerns