cancel
Showing results for 
Search instead for 
Did you mean: 

ICX 7150 VLAN 1

johan_castro_a
New Contributor III

Hi, I'm new to icx's. I have a 7150-24P. I'm trying to configure ethernet 1/1/24 as the uplink port so I tagged in all vlans except vlan1 (default vlan, which I don't use).

When I run sh runn this is showing on vlan 1, is this normal or is there something wrong? I don't want or need to use vlan 1 at all.

vlan 1 name DEFAULT-VLAN by port
 no untagged ethe 1/1/24

Thanks.
 

1 ACCEPTED SOLUTION

jijo_panangat
RUCKUS Team Member

Hi Johan,

The running config shows port 1/1/24 is not untagged on vlan 1. By default all L2 ports are part of vlan 1, You can verify the vlan association of a port using 'show vlan e 1/1/24'

 

View solution in original post

4 REPLIES 4

jijo_panangat
RUCKUS Team Member

Hi Johan,

The running config shows port 1/1/24 is not untagged on vlan 1. By default all L2 ports are part of vlan 1, You can verify the vlan association of a port using 'show vlan e 1/1/24'

 

Thanks. How can I remove the port from vlan 1?

 'no untagged ethe 1/1/24' under vlan 1.

 

Thank you!