I cant my Connect ICX 7250 to ISP modem access

[Anonymous]

I can't access the internet from my vlan's but can access all PC inside in VLAN's

[Anonymous]

Without seeing your config it sounds like you need a default gateway set on the switch to the ISP modem. All devices in the vlans should have default gateway of IP address of the vlan interface.

[Anonymous]

there are my configuration below. My ISP Router is connected on interface eth 1/1/1 and his IP is 192.168.1.1/24. i can route between vlans using ve interfaces bu i haven't internet in VLANs

ICX7250-24 Router(config-if-e1000-1/1/1)#sh running-config
Current configuration:
!
ver 08.0.91T213
!
stack unit 1
  module 1 icx7250-24-port-management-module
  module 2 icx7250-sfp-plus-8port-80g-module
  stack-port 1/2/3
!
!
global-stp
!
lag 3.1_floor dynamic id 1
 ports ethe 1/2/1 to 1/2/2
!
lag 3.2_floor dynamic id 2
 ports ethe 1/2/3 to 1/2/4
!
lag 7.1_level dynamic id 3
 ports ethe 1/2/5 to 1/2/6
!
lag 7.2_level dynamic id 4
 ports ethe 1/2/7 to 1/2/8
!
!
!
vlan 1 name DEFAULT-VLAN by port
 spanning-tree
!
vlan 10 by port
 tagged lag 1 to 4
 router-interface ve 10
 spanning-tree
!
vlan 232 by port
 tagged lag 1 to 4
 untagged ethe 1/1/2 to 1/1/24
 router-interface ve 232
 spanning-tree 802-1w
 loop-detection
!
vlan 233 by port
 tagged lag 1 to 4
 router-interface ve 233
 spanning-tree
 loop-detection
!
!
!
!
!
!
!
!
!
!
!
!
system-max ip-route-default-vrf 10000
system-max ip-route-vrf 500
!
vrf mem
exit-vrf
!
!
aaa authentication web-server default local
aaa authentication login default local
enable aaa console
ip dns domain-list missionbg.be
ip dns server-address 192.168.232.15 192.168.232.2
ip route next-hop-enable-default
ip route next-hop-recursion 5
ip route 0.0.0.0/0 192.168.1.1
ip route 192.168.1.0/24 192.168.232.234
ip route 192.168.1.0/24 192.168.1.2
ip route 192.168.1.0/24 192.168.232.254
ip route 192.168.1.0/24 192.168.232.1
ip route 192.168.232.0/24 192.168.1.2
ip router-id 1.1.1.1
no ip source-route
!
mac filter log-enable
no telnet server
username super password .....
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface loopback 1
 ip address 192.168.0.1 255.255.255.0
!
interface management 1
 ip address 192.168.254.254 255.255.255.0
!
interface ethernet 1/1/1
 route-only
 ip address 192.168.1.2 255.255.255.0
 no spanning-tree
 tag-profile enable
!
interface lag 1
 loop-detection shutdown-disable
 speed-duplex 1000-full
 no spanning-tree
!
interface lag 2
 loop-detection
 speed-duplex 1000-full
 no spanning-tree
!
interface lag 3
 loop-detection shutdown-disable
 speed-duplex 1000-full
!
interface lag 4
 loop-detection shutdown-disable
 speed-duplex 1000-full
!
interface ve 10
 ip access-group ACL_10 out
 ip address 10.10.1.254 255.255.255.0
!
interface ve 232
 ip address 192.168.232.254 255.255.255.0
!
interface ve 233
 ip address 192.168.233.254 255.255.255.0
!
!
!
!
!
no lldp run
!
!
!
!
!
!
!
end


Thank you in advance for help

[jijo_panangat]

Hi Rumen,

Are u saying that unable to reach 192.168.1.1 from your PC/vlan ? If not clarify which Ip address on internet is failing.



Thanks
Jijo 

[Anonymous]

Yes, that's right. ip address for the modem is 192.168.1.1 and I connected to port eth 1/1/1 which I assign ip 192.168.1.2. i can't ping ip 192.168.1.1 and any other ip addresses in the internet but i can ping 192.168.1.2 for everywhere from any vlans. i think that i can't route traffic from ip 192.168.1.1 to vlans. But i can ping any outside ip address from the switch console. I am don't know exactly what should be config of the port eth 1/1/1