cancel
Showing results for 
Search instead for 
Did you mean: 

How to Install ICX Switch in Emulator Software

ye_zey
New Contributor II

Hi All,

i would like to create testing environment for ICX SW and Zone Controller but I don't know to Install that particular device in Emulator Software (GNS3) . If you have any idea please share for my testing . 

Thanks You.

1 ACCEPTED SOLUTION

hashim_bharooc1
RUCKUS Team Member

Hi All,

I checked with Product Lime Manager, he said it is not yet planned for the near future.

Sorry about the inconvenience.

Thanks

Best Regards

Hashim

View solution in original post

8 REPLIES 8

hashim_bharooc1
RUCKUS Team Member

Hi ye_zey,

We do not support GNS3, also we do not have any simulators for ICX.

Hope this helps.

Thanks

Hashim

@hashim_bharoocha 

My Organization also use over 30 ICX SW, but there is no testing environment . consequently it is very risky to make config changes at the same time in production.

hanumantha_redd
New Contributor

Most of the vendors will support simulation software but why ICX switches don't have this support I don't know.

Even in my current organization all the network switches are using ICX model only but I can't do practice in the production switches.

@hanumantha_reddy

Yes , You are right . i also have same problem .