cancel
Showing results for 
Search instead for 
Did you mean: 

Firewall settings for ICX 7150

sam_chan_bve1y5
New Contributor II

Assuming ICX with dhcp  ip behind Firewall, in order for ICX 7150 (ver 8.0.80ca) with sw registrar feature) to communicate with vSZ 5.0 controller, what protocol ports need to be allowed in firewall?  
4 REPLIES 4

paul_mcguire_20
Contributor
I believe it is https

alexey_isakov
Contributor
11443, 91, 443

sam_chan_bve1y5
New Contributor II
I was told they are using internal protocol over SSH/TELNET  to communicate.  That is why in early version, those protocol has to be enabled in configuration, but not in this new version.  No? 

1143, 91, 443 are they udp port#? TCP port#?

Ankush_Chandan
RUCKUS Team Member
Hi Sam,

You need to allow port 22 and 443. Please refer to vSZ admin guide page 134 for reference.

Regards,
-Ankush