I have an ICX6610 that I wanted to test some subnets on an SRX 240 firewall. On my SRX I have an interface that's configured as a DHCP client. If I connect a cord between that port and another switch that has DHCP from an SSG firewall, I get an IP bound.
But if I connect it to a port on the 6610 I get the offer but there is no binding on the SRX. The 6610 though sees it as bound. After around a minute or so the SRX port returns to INIT state.
How can I investigate DHCP issues on the 6610?
Here's my config:
vlan 20 by port untagged ethe 1/1/2 router-interface ve 20 !
ip dhcp-server enable ! ip dhcp-server pool dhcp20 dhcp-default-router 192.168.20.254 excluded-address 192.168.20.100 192.168.20.254 lease 1 0 0 network 192.168.20.0 255.255.255.0 deploy !
interface ve 20 ip address 192.168.20.254 255.255.255.0 !
SSH@ICX6610-48P Router#show ip dhcp-server binding Bindings from all pools: IP Address Client-ID/ Lease expiration Type Hardware address
I have no VLANs configured on the SSG/SRX port. I thought I could define a VLAN and untag the port on the ICX and it should work. The port works with a notebook running Windows. Is there anything more I must add to the configuration?