cancel
Showing results for 
Search instead for 
Did you mean: 

Can't get firmware uploaded to switch.

network_adminis
New Contributor III

When I try to upload the firmware to the switch it will error out. I have tried through SmartZone, TFTP, and flash drive with no success. Yes, I downloaded it several times and even tried a different version but it still will error out.

telnet@xxxxxxx#copy disk0 system-manifest FI08095h_Manifest.txt secondary
Parameter Validation Successful
Manifest file Download Done
Signature Download Done
....Signature Download failed
Manifest Download Failed
telnet@xxxxxxx#copy disk0 system-manifest FI08095h_Manifest.txt primary
Parameter Validation Successful
Manifest file Download Done
Signature Download Done
..Signature Download failed
Manifest Download Failed
telnet@xxxxxxxx#copy tftp system-manifest 10.50.0.133 FI08095h_Manifest.txt primary
Parameter Validation Successful
..Manifest file Download Done
..Signature Download Done
..Signature Download failed
Manifest Download Failed
telnet@xxxxxxx#copy tftp system-manifest 10.50.0.133 FI08095g_Manifest.txt primary
Parameter Validation Successful
..Manifest file Download Done
..Signature Download Done
..Signature Download failed
Manifest Download Failed

 

4 REPLIES 4

BenBeck
Moderator
Moderator

I am not sure exactly what is happening there, but it isn't liking something with your folder/manifest. I would say 99.9% of people just use the singular UFI image for upgrades. If you don't specifically need the manifest flavor of upgrade, I would recommend trying the UFI. 

Example of TFTP upgrade: (not sure what platform you are on, so image name could be different for you)

copy tftp flash 192.168.1.250 SPR08095gufi.bin primary

For USB:

copy disk0 flash SPR08095gufi.bin primary

Also, can you confirm what code you are coming from? (show version)

 

Ben Beck, RCNA, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

Here is what happens when I do that.

telnet@xxxxxxx#copy tftp flash 10.50.0.133 SPS08095hufi.bin secondary
Parameter Validation Successful
Image Download started
..Image Download Done
Image Validation Started
..Application exception

What code are you on now? (Sh version)

Ben Beck, RCNA, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

Downgrading from 9.x. I had no issues with the other 40 some odd switches but I have two that refuse to take the firmware.