Applying Dynamic ACL with Windows NPS

[networkguy85]

Trying to apply an existing ACL on an ICX 7150 via Windows NPS network policy using Filter-Id attribute.  Syslog indicates Error: Unable To Parse ACL attribute.  I checked for syntax/typo errors, and everything seems configured properly.  Has anyone else had this issue?  Clients authenticate properly when the Filter-Id attribute is removed from the network policy.

[Mayank]

Hello Networkguy85,

Thank you for contacting us.

I have a couple of questions for you:

- Is this a new implementation or an existing setup?

- What is the firmware version you are currently using on ICX?

Thank you

[networkguy85]

Hello Mayank,

This is an existing setup with the Windows NPS server.  It is used for 802.1x and MAC authentication and has been working properly.  Trying to add the dynamic ACL via the Filter-Id attribute is new.  The switch is an ICX7150-48ZP-8X10GR running Version:08.0.95jT213 (SPR08095j.bin).

Thanks

[Mayank]

Hi @networkguy85 

Thank you for the update.

I would advise you to open a ticket with us so that we can test it thoroughly in the lab.

Please log a ticket with the below link so that we can help you further

https://support.ruckuswireless.com/contact-us

I hope this information helps you

Please feel free to leave us a message if any concerns

Note: Please feel free to mark the post as ACCEPTED SOLUTIONS if it addresses your query.

Thanks