Any solution for problems with my new ICX 7150 C12 switch? Video links provided...

[peter_w_9h7tcet]

My problems started when I failed to set the static IP address via Telnet, but I suspect this switch is just faulty.

Videos are self explantory.

1. No power to PoE AP.  https://www.dropbox.com/s/n8zqbi5e8emomqb/IMG_5796.MOV?dl=0

2. Won't factory reset.   https://www.dropbox.com/s/ukz5zqgr3sjtar7/IMG_5798.MOV?dl=0

I don't have a console lead and the Switch wont allow me to Telnet back into the switch.

If there's a quick fix please let me know.  If the switch is toast then that's a little disappointing as it's brand new and it should be working.

The second identical switch which I bought with this is working fine.

[jijo_panangat]

Yes, write mem will save all your configurations to start-up file.

[peter_w_9h7tcet]

Jijo thanks my friend!  I worked it out.  Write Memory comes at the end of each operation to add a password, IP, etc.  Not sure why my IP changed as I did a write mem after this last time, but it seems stable now.  I did a write mem after my inline power activation this time around and this seems to have stuck.  Just a thought for Ruckus...it would be good if all of this set up functionality was available from the web management interface as its a bit of a fiddle to need to use CLI to set this up.

Anyway.  All fixed now and many thanks for your patience!  Peter  

[jijo_panangat]

Glad that you figured it out 🙂


Thanks
Jijo