Am I able to get my secondary boot code to primary?

[sh_ruckus_rucku]

Hi all,

Running a Ruckus ICX7150-C12-POE and I followed the upgrade process from https://docs.commscope.com/bundle/fastiron-08090-upgradeguide/page/GUID-5DD7EE86-6988-4CA7-81D2-22EA... to upgrade to 08.0.90j on my switch.  After copying over the image to the secondary and rebooting my switch I received the error

==========================================================================
==========       WARNING: Boot-monitor version mismatch!!!      ==========
==========   Please use "show boot-monitor" command for details ==========
=========================================================================='

Which is expected because after this boot my device used the 10.1.14 boot code in the Primary Boot code area.

When I run show boot-monitor I see:

Stack unit 1:
Current Version :  10.1.14
Recommended Version:  10.1.18   (Mismatch)

And when I run show flash, I see:

Stack unit 1:
  NAND Type: Micron NAND 2GiB (x 1)
  Compressed Pri Code size = 29360128, Version:08.0.90jT211 (SPS08090j.bin)
  Compressed Sec Code size = 29360128, Version:08.0.90jT211 (SPS08090j.bin)
  Compressed Pri Boot Code size = 786944, Version:10.1.14T225 (mnz10114)
  Compressed Sec Boot Code size = 786944, Version:10.1.18T225 (mnz10118)
  Code Flash Free Space = 1155084288

So my question is - How do I get Compressed Sec Boot Code to Compressed Pri Boot Code?  The copy command doesn't work.  😞 

Did I miss something?

Trent