cancel
Showing results for 
Search instead for 
Did you mean: 

7150 no POE to APs

john_taylor
New Contributor II

Why is my switch not powering the access points?

6 REPLIES 6

mohammad_atmazi
New Contributor III

If you run image older 080.80 you need to use this command

interface eth 1/1/x

inline power 

Otherwise please type show inline power and show as the result

john_taylor
New Contributor II

What if the switch won’t transmit its own WiFi to be able to access the software settings?

@john_taylor

I think you mean you can not access the AP  like ping or HTTP; so you need to be sure your pc and AP are in the same VLAN and your pc have the same range of networks like ( the pc IP 192.168.1.10/24 and the AP IP 192.168.1.11/24 so you can access the AP in the switch Succesful.

hashim_bharooc1
RUCKUS Team Member

Hi John

You need to enable poe on the interfaces like Mohammad mentioned.

Hope this helps

Thanks

Hashim