can't add R700 to ZD3000

[ilya_moskalev]

Hello, i have new AP R700 & ZD 3000
FW  9.7.0.0 build 220, i know what i can't add this, because fw is to old. Needed 9.8 fw and above. Where i can take a new fw for connect ap to controller ?

[irvan_irvan]

"set scg ip" means that use firmware Smartzone/vSZ.
Reset your ap t301 and go to 192.168.0.1. change to firmware standalone t301s. try again ssh "set director ip" 

[chbane_mohamed]

please how can i change to firmware standalone t301s, i try to download the firmwares but No firmware was running

[irvan_irvan]

You can download the firmware standalone (100.1) 839-standalone-ap-software-100-1-0-0-432-outdoor-aps
please follow my step before

[irvan_irvan]

1. Reset the AP : you can see the reset button on the side of port AP
2. Go to 192.168.0.1 and upgrade to standalone firmware

[chbane_mohamed]

I am far from the site now if you can give me your email to contact you when I will be on site, i think i already download this firmware but the ap Does not accept any firmware