RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
10-14-2019 11:15 PM
10-16-2019 09:12 AM
10-16-2019 09:22 AM
2.4 GHz base MAC Address - D8:38:FC:38:75:F8
5 GHz base MAC Address - D8:38:FC:38:75:FC
Base MAC address would be used for mesh networks.
The 7th digit increases by 4 (in hex format) from the base MAC address. Once all of the hex options are used there, the 12th digit increases by 1 and the 7th digit restarts in incrementing. This is based off of their wlan0/1 base MAC address. See below.
rkscli: get wlanlist
name status type wlanID radioID bssid ssid
--------------------------------------------------------------------------------------------------
wlan0 up AP wlan0 0 d8:38:fc:38:75:f8 SSID01
wlan1 up AP wlan1 0 d8:38:fc:78:75:f8 SSID02
wlan2 up AP wlan2 0 d8:38:fc:b8:75:f8 SSID03
wlan3 up AP wlan3 0 d8:38:fc:f8:75:f8 SSID04
wlan4 up AP wlan4 0 d8:38:fc:38:75:f9 SSID05
wlan5 up AP wlan5 0 d8:38:fc:78:75:f9 SSID06
wlan6 up AP wlan6 0 d8:38:fc:b8:75:f9 SSID07
wlan7 up AP wlan7 0 d8:38:fc:f8:75:f9 SSID08
wlan8 up AP wlan8 0 d8:38:fc:38:75:fa SSID09
wlan9 up AP wlan9 0 d8:38:fc:78:75:fa SSID10
wlan10 up AP wlan10 0 d8:38:fc:b8:75:fa SSID11
wlan11 up AP wlan11 0 d8:38:fc:f8:75:fa SSID12
wlan12 up AP wlan12 0 d8:38:fc:38:75:fb SSID13
wlan13 up AP wlan13 0 d8:38:fc:78:75:fb SSID14
wlan14 up AP wlan14 0 d8:38:fc:b8:75:fb SSID15
recovery-ssid down AP wlan102 0 00:00:00:00:00:00 Recover.Me-3875F0
wlan32 up AP wlan32 1 d8:38:fc:38:75:fc SSID01
wlan33 up AP wlan33 1 d8:38:fc:78:75:fc SSID02
wlan34 up AP wlan34 1 d8:38:fc:b8:75:fc SSID03
wlan35 up AP wlan35 1 d8:38:fc:f8:75:fc SSID04
wlan36 up AP wlan36 1 d8:38:fc:38:75:fd SSID05
wlan37 up AP wlan37 1 d8:38:fc:78:75:fd SSID06
wlan38 up AP wlan38 1 d8:38:fc:b8:75:fd SSID07
wlan39 up AP wlan39 1 d8:38:fc:f8:75:fd SSID08
wlan40 up AP wlan40 1 d8:38:fc:38:75:fe SSID09
wlan41 up AP wlan41 1 d8:38:fc:78:75:fe SSID10
wlan42 up AP wlan42 1 d8:38:fc:b8:75:fe SSID11
wlan43 up AP wlan43 1 d8:38:fc:f8:75:fe SSID12
wlan44 up AP wlan44 1 d8:38:fc:38:75:ff SSID13
wlan45 up AP wlan45 1 d8:38:fc:78:75:ff SSID14
wlan46 up AP wlan46 1 d8:38:fc:b8:75:ff SSID15
wlan47 up AP wlan47 1 d8:38:fc:f8:75:ff SSID16
The interesting note here is that the 2.4 GHz radio gets wlans 0-14 and the 5 GHz radio gets wlans 32-47. Doing the math there, the 2.4 GHz radio is limited to 15 SSIDs while the 5 GHz radio can actually accept 16. This looks to be because of the recovery-ssid shown above assumed to be 2.4 GHz only.
Note some AP models only support up to 16 BSSIDs, so it'd be the 1st 8 per frequency.10-17-2019 03:31 AM
10-16-2019 09:47 AM
10-17-2019 03:34 AM
