I was recently given a 7982 for home use from our schools technical supplier. Upon configuring it for use, I cannot seem to get a device to stay connected to it. I come from the instructional side of technology, and I'm very ignorant when it comes to the technical side. Any insights on how they should be configured?
Firmware version is 220.127.116.11.15
I originally thought my cable modem might be the issue, so I went ahead and placed it. However, that seems to be working fine .
Unfortunately, this did not solve the problem. I verified with the ISP that the modem is running correctly. I restarted everything. It seems now that the computer can connect to the access point at 2.4, but will not connect to the Internet. When I hardwire from the modem to the computer, it works fine
Hi Monnat , not sure if my reply to Martin below answers your question. From the user interface on the Aris modem, I'm not finding an IP address. However, to access the user interface, I use a 192 address. Is there way for me to tell this from the router?
To be more specific about the current issue, I have some devices that will connect to the router (kindle fire stick, iPad) but not access the Internet. A couple of other devices, such as my iPhone 7 and windows laptop, connect to the router and Internet fine. On the ruckuseand, I have set a static channel for both the 2.4 and 5.0 access points. Channel 9 for 2.4, and I believe channel 36 for the 5.0.
Again, I apologize for my ignorance! I appreciate everyone's help.